dsourcing

Blog by Dsourcing

Month: August, 2012

Product brochure – 3-Bay (Triple) Hard Disk Drive/Solid-State Drive RAID System

3-Bay (Triple) Hard Disk Drive_Solid-State Drive RAID System_Product Brochure

Product brochure – 2-Bay (Dual) Hard Disk Drive/Solid-State Drive RAID System

2-Bay (Dual) Hard Disk Drive/Solid-State Drive RAID System_Product Brochure

What is RAID (Redundant Array of Independent Disks; a.k.a. Redundant Array of Inexpensive Disks)?

What is RAID (Redundant Array of Independent Disks; a.k.a. Redundant Array of Inexpensive Disks)?

RAID (Redundant Array of Independent Disks; a.k.a. Redundant Array of Inexpensive Disks) is a computer data storage technology that combines multiple disk drive components into a logical unit, which is accessed by the operating system. The basic idea is to use redundancy to offset the increased failure rate of spreading storage across many disks.

Data storage is distributed across the respective drives in one of several methods called “RAID levels”, depending on the different schemes or architectures that are required. Each design has its own risk mitigation, capacity and performance.

RAID-1: This type is also known as disk mirroring and consists of at least two drives that duplicate the storage of data. There is no striping. Read performance is improved since either disk can be read at the same time. Write performance is the same as for single disk storage. RAID-1 provides the best performance and the best fault-tolerance in a multi-user system.

RAID-1 is the array of choice for performance-critical, fault-tolerant environments. The basic idea is to use redundancy to offset the increased failure rate of spreading storage across many disks.

Advantages:

o Reading and writing of data are much faster – fetch data in parallel.

o Higher reliability – if disk fails, just make copy of the other disk to generate mirror.

Unable to find or buy compatible SCSI and IDE hard disk drive for your equipment?

Are you having hard disk drive failure problems?

Equipment downtime due to hard disk drive failure?

Unable to find or buy compatible SCSI and IDE hard disk drive for your equipment?

Cost of PCB and CPU rack (due to hard disk drive failure) repair too high?

Solution: RAID system from Dsourcing.

RAID (SCSI / IDE / SATA)-System für Datensicherheit und Optimale Leistung

RAID (SCSI / IDE / SATA)-System für Datensicherheit und Optimale Leistung

 

Was ist RAID (Redundant Array of Independent Disks, bekannt als Redundant Array of Independent Disks)?

RAID (Redundant Array of Independent Disks, bekannt als Redundant Array of Independent Disks) ist ein Computer-Datenspeicher-Technologie, die mehrere Festplatten Komponenten vereint zu einer logischen Einheit, die durch das Betriebssystem zugegriffen wird. Die Grundidee ist, um Redundanz zu verwenden, um die erhöhte Ausfallrate der Verbreitung von Lagerung über viele Festplatten ausgeglichen.

 

Die Datenspeicherung erfolgt über die jeweiligen Laufwerke in einem von mehreren Verfahren als “RAID-Level” verteilt, je nach den verschiedenen Systemen oder Architekturen, die erforderlich sind. Jedes Design hat seine eigene Risikominimierung, Kapazität und Leistung.

 

RAID-1: Dieser Typ wird auch als Disk-Mirroring bekannt und besteht aus mindestens zwei Festplatten, die die Speicherung von Daten zu duplizieren. Es wird kein Striping. Lesen Sie die Leistung wird verbessert, da entweder Festplatte zur gleichen Zeit gelesen werden kann. Die Schreib-Performance ist die gleiche wie für Einzel-Plattenspeicher. RAID-1 bietet die beste Leistung und die beste Fehlertoleranz in einer Multi-User-System.

 

RAID-1 ist die Anordnung der Wahl für Performance-kritischen, fehlertoleranten Umgebungen. Die Grundidee ist, um Redundanz zu verwenden, um die erhöhte Ausfallrate der Verbreitung von Lagerung über viele Festplatten ausgeglichen.

 

Vorteile:

o Lesen und Schreiben von Daten sind viel schneller – Liest die Daten parallel.

o Höhere Zuverlässigkeit – wenn Festplatte ausfällt, so stellen Kopie der Festplatte auf andere Spiegel zu generieren.

3-Bay (Triple) Hard Disk Drive / Solid-State Drive RAID System

 

3-Bay (Triple) Hard Disk Drive / Solid-State Drive RAID System for Industrial Applications

 

@  3-Bay (Triple) Hard Disk Drive / Solid-State Drive RAID System: Using RAID-1 (Mirroring) technology, this product will mirrors data to the other disk drive simultaneously; avoiding equipment system downtime and also preserving (backup) important information, in the event of hard disk drive failure.

@  On-line automatic (periodic) backup of data to the 3rd disk drive for extra data security. Configuration of schedulable backup can be determined by user.

@  User – Friendly GUI configuration utility for backup scheduling.

@  3-Bay (Triple) Hard Disk Drive / Solid-State Drive RAID System Controller provide Windows based user interface for configuring disk-backup schedule as user desired.

@  3-Bay (Triple) Hard Disk Drive / Solid-State Drive RAID System is designed for data auto backup solution and data security solution.

@  3-Bay (Triple) Hard Disk Drive / Solid-State Drive RAID System (with automatic data backup solution) is designed for manufacturing, Research and Development, aeronautical, marine, bio-medical, semiconductor industry and any other applications which require data storage.

@  Successful application in semiconductor manufacturing industry, for example. LCD, LED, Solar, Foundries and RAM Fabs.

@  Adjustable SATA hard disk drive or Solid-State Drive [SSD] capacity: Disk drive capacity can be modified by proprietary firmware to solve the potential compatibility issues in different systems.

@  SATA Standard hard disk drive and Solid-State Drive [SSD] (2.5”) can be used.

@  Customize software design: For different production systems or other applications, customize design is available.

@  SATA, SCSI & IDE interfaces are available.

@  Automatic backup of data from one disk drive to another disk drive simultaneously.

@  Hot swappable disks capability, which will not impact or interrupt manufacturing processes.

@  Real-time monitoring of disk status and auto-alert of disk failure by LED/LCD.

@  Unique battery backup module:  When power supply is unstable, battery backup module will maintain stable voltage output to the RAID system.

@  Driverless, 100% hardware RAID system; which allows plug and play capability.

@  Online bad sector recovery.

@  Dimensions: 14.6cm (Length) x 10.2cm (Breath) x 4.2cm (Height).

@  On-site installation by Dsourcing engineers.

Visit our website @ http://www.dsourcing.com.sg

Email: sales@dsourcing.com.sg

Telephone: +65 6684 9368

2-Bay (Dual) Hard Disk Drive / Solid-State Drive RAID System

 

2-Bay (Dual) Hard Disk Drive / Solid-State Drive RAID System for Industrial Applications

 

@  2-Bay (Dual) Hard Disk Drive / Solid-State Drive RAID System: Using RAID-1 (Mirroring) technology, this product will mirrors data to the other disk drive simultaneously; avoiding equipment system downtime and also preserving (backup) important information, in the event of hard disk drive failure.

@  2-Bay (Dual) Hard Disk Drive / Solid-State Drive RAID System (with automatic data backup solution) is designed for manufacturing, Research and Development, aeronautical, marine, bio-medical, semiconductor industry and any other applications which require data storage.

@  Successful application in semiconductor manufacturing industry, for example. LCD, LED, Solar, Foundries and RAM Fabs.

@  Adjustable SATA hard disk drive or Solid-State Drive [SSD] capacity: Disk drive capacity can be modified by proprietary firmware to solve the potential compatibility issues in different systems.

@  SATA Standard hard disk drive and Solid-State Drive [SSD] (2.5”) can be used.

@  Customize software design: For different production systems or other applications, customize design is available.

@  SATA, SCSI & IDE interfaces are available.

@  Automatic backup of data from one disk drive to another disk drive simultaneously.

@  Hot swappable disks capability, which will not impact or interrupt manufacturing processes.

n  Real-time monitoring of disk status and auto-alert of disk failure by LED/LCD.

@  Unique battery backup module:  When power supply is unstable, battery backup module will maintain stable voltage output to the RAID system.

@  Driverless, 100% hardware RAID system; which allows plug and play capability.

@  Dimensions: 14.6cm (Length) x 10.2cm (Breath) x 2.7cm (Height).

@  On-site installation by Dsourcing engineers.

Visit our website @ http://www.dsourcing.com.sg

Email: sales@dsourcing.com.sg

Telephone: +65 6684 9368

RAID (SCSI / IDE / SATA Hard Disk Drive) System for Data Security and Optimal Performance

What is RAID (Redundant Array of Independent Disks; a.k.a. Redundant Array of Inexpensive Disks)?

RAID (Redundant Array of Independent Disks; a.k.a. Redundant Array of Inexpensive Disks) is a computer data storage technology that combines multiple disk drive components into a logical unit, which is accessed by the operating system. The basic idea is to use redundancy to offset the increased failure rate of spreading storage across many disks.

Data storage is distributed across the respective drives in one of several methods called “RAID levels”, depending on the different schemes or architectures that are required. Each design has its own risk mitigation, capacity and performance.

RAID-1: This type is also known as disk mirroring and consists of at least two drives that duplicate the storage of data. There is no striping. Read performance is improved since either disk can be read at the same time. Write performance is the same as for single disk storage. RAID-1 provides the best performance and the best fault-tolerance in a multi-user system.

RAID-1 is the array of choice for performance-critical, fault-tolerant environments. The basic idea is to use redundancy to offset the increased failure rate of spreading storage across many disks.

Advantages:

o Reading and writing of data are much faster – fetch data in parallel.

o Higher reliability – if disk fails, just make copy of the other disk to generate mirror.

Blog by Dsourcing

About Us

Dsourcing Pte. Ltd. is a company specializing in semiconductor equipment installation, relocation, start-up, refurbishment and sale of spare parts. Established in Singapore (Year 2010), Dsourcing Pte. Ltd.’s primary focus and engineering expertise are in Thin Film sputtering equipment, particularly in:

  • Applied Materials Endura® Physical Vapour Deposition (PVD) equipment (200mm and 300mm)
  • Applied Materials Tungsten Chemical Vapour Deposition (CVD) equipment (300mm)
  • Applied Materials Centura® and Producer® Chemical Vapour Deposition (CVD) equipment (200mm)

Our management and engineers are experienced and professional; with the desire to go the extra mile in delivering customer satisfaction and quality service. In addition, we are able to provide a wide spectrum of solutions for the semiconductor industry. Our customers have given accolades and recognition to the products and services provided by Dsourcing Pte. Ltd.

Dsourcing Pte. Ltd.  has sales and service operations in Asia and Europe (eg. France, Korea, Malaysia, Philippines, Singapore and etc.)

Our Core Values:

  • Professional
  • Quality products and Services
  • Responsible